.bmp)
Many people dream of traveling the country, but they may not want to spend a ton of money on airplane flights hotels, not to mention the high cost of having to eat out for every meal. You can lower all these expenses significantly and still travel if you do so by driving with a trailer. Before you go, you should learn how to stabilize a parked travel trailer so that you do not run into any problems when parked later on down the line.
It is not an absolute necessity to stabilize your rig each and every time you park. If you are just parking for one night or are in, say, a parking lot with concrete, then you can skip, But on unstable ground for any length of time, it is a good idea to stabilize to ensure things do not shake or become unsteady.
Trailers come in a wide variety of sizes, and the larger ones tend to be much more stable overall, all on their own. The smaller ones are less stable, so if you are using one of those, then you definitely want to get stabilization tools before you start traveling. Thankfully, they are not very big or cumbersome to carry or store.
Before you can stabilize anything, you must park, and that means finding a good spot. If you can find a concrete pad, that would be best, since it will not sink. Campgrounds or RV parks are excellent places to find these kinds of stable pads, and they have water and sewage hookups to boot. However, anyplace that is relatively solid ground can work. Try to avoid muddy areas, as the trailer can sink too easily this way.
Jacks are a mainstay of people who do this type of traveling. They are generally very affordable and any good auto parts store worth its salt will have them in stock at all times, so you can find them easily.
Blocks are another way to go. Most people use 2x6 blocks that are anywhere from six to eight inches in length. The length of these blocks, which are usually made of wood, largely depends upon the size of the trailer you are trying to stabilize.
Lots of people prefer the ultimate in stable vehicles, which means they use a combination of both jacks and wood blocks. You will want to do this if you are parked on softer ground, or if there has recently or will soon be a lot of rain.
As technology surrounding plastic increases, manufacturers can make plastic blocks that are just as strong and steady as wood ones, but more compact and lightweight. Consider using these instead of wood.
If you do choose to use both, you use the jack the same way you normally would, only you place one or more of the blocks on the ground first. The jack then goes on top of the blocks, allowing for extra safety. The way to use the jack depends on the model you are using, as there are many different types from scissor to basic varieties.
It is not an absolute necessity to stabilize your rig each and every time you park. If you are just parking for one night or are in, say, a parking lot with concrete, then you can skip, But on unstable ground for any length of time, it is a good idea to stabilize to ensure things do not shake or become unsteady.
Trailers come in a wide variety of sizes, and the larger ones tend to be much more stable overall, all on their own. The smaller ones are less stable, so if you are using one of those, then you definitely want to get stabilization tools before you start traveling. Thankfully, they are not very big or cumbersome to carry or store.
Before you can stabilize anything, you must park, and that means finding a good spot. If you can find a concrete pad, that would be best, since it will not sink. Campgrounds or RV parks are excellent places to find these kinds of stable pads, and they have water and sewage hookups to boot. However, anyplace that is relatively solid ground can work. Try to avoid muddy areas, as the trailer can sink too easily this way.
Jacks are a mainstay of people who do this type of traveling. They are generally very affordable and any good auto parts store worth its salt will have them in stock at all times, so you can find them easily.
Blocks are another way to go. Most people use 2x6 blocks that are anywhere from six to eight inches in length. The length of these blocks, which are usually made of wood, largely depends upon the size of the trailer you are trying to stabilize.
Lots of people prefer the ultimate in stable vehicles, which means they use a combination of both jacks and wood blocks. You will want to do this if you are parked on softer ground, or if there has recently or will soon be a lot of rain.
As technology surrounding plastic increases, manufacturers can make plastic blocks that are just as strong and steady as wood ones, but more compact and lightweight. Consider using these instead of wood.
If you do choose to use both, you use the jack the same way you normally would, only you place one or more of the blocks on the ground first. The jack then goes on top of the blocks, allowing for extra safety. The way to use the jack depends on the model you are using, as there are many different types from scissor to basic varieties.
About the Author:
When you are searching for information about how to stabilize a parked travel trailer, visit our web pages online today. More details are available at http://www.ksstabilizers.com now.
0 commentaires:
Enregistrer un commentaire